Bespoke Contracting builds bathrooms for Sherwood Park homeowners that are waterproofed properly, tiled cleanly, and finished to last, from powder rooms to full ensuites. Sherwood Park is a large hamlet in Strathcona County, first laid out in 1953 as a satellite community for workers at Edmonton's Refinery Row.
Sherwood Park is a large hamlet in Strathcona County, first laid out in 1953 as a satellite community for workers at Edmonton's Refinery Row.
Sherwood Park spans everything from 1950s and 1960s bungalows in the mature core to large modern two storeys in Emerald Hills, so renovation needs vary widely across The Park.
A Sherwood Park bathroom lives or dies on what you cannot see: the waterproofing behind the tile and under the floor. We treat those hidden layers as the real project.
Every home has its own history. Here is what shapes renovation work in Sherwood Park specifically.
Sherwood Park began in the mid 1950s as a planned community and was originally going to be called Campbelltown before the name changed in 1956.
Its oldest neighbourhoods, including Sherwood Heights, Glen Allan, Mills Haven, and Broadmoor, date to the 1950s and 1960s, which means a lot of aging original finishes ready for renovation.
Newer areas such as Summerwood, Emerald Hills, Lakeland Ridge, and Clarkdale Meadows carry a very different housing stock and set of renovation needs.
Sherwood Park is unusual in that it is not a city at all but a very large hamlet within Strathcona County, one of the biggest of its kind in Canada. It grew out of a mid 1950s plan to house workers at Edmonton's Refinery Row, and that origin still shapes it: a community built deliberately and quickly, in identifiable waves, rather than one that grew up slowly over centuries.
That wave pattern matters enormously for renovation. The mature core, neighbourhoods like Sherwood Heights, Glen Allan, Mills Haven, and Broadmoor, holds homes from the 1950s through the 1970s that are now well into the stage where original kitchens, bathrooms, and basements are dated and worn. These are the homes where a thoughtful renovation delivers the most, because good bones are hiding under decades old finishes.
The newer side of The Park, Summerwood, Emerald Hills, Lakeland Ridge, and Clarkdale Meadows, is a different story. Here the homes are recent, often with unfinished basements waiting to become real living space, and renovations tend toward finishing, personalizing, and adding function rather than replacing worn out systems. Understanding which Sherwood Park you are renovating in is the starting point for any sensible plan.
Bathroom renovation is one of the strongest search terms in Sherwood Park, and it is easy to see why. The community's large stock of family homes means a lot of original and dated bathrooms that get heavy daily use, from busy main baths to ensuites that have not been touched since the house was built. These are the rooms where waterproofing failures quietly accumulate.
We see the results of cut rate bathroom work in Sherwood Park regularly: showers that were never properly waterproofed, now feeding moisture into the framing behind them. Building the wet areas to a real standard is the whole point, and in a family home where the bathroom runs hard every single day, it is the difference between a renovation that lasts and one you redo.
Whatever the age of your Sherwood Park home, our approach is the same: understand the specific house in front of us, plan the work against a fixed written scope, and build it properly. You can read more about how we approach Bathroom Renovation in Edmonton, and reach out whenever you are ready to talk about your project.
Renovating in Sherwood Park usually means working with one of two very different kinds of home. In the mature core, neighbourhoods like Sherwood Heights, Glen Allan, Mills Haven, and Broadmoor are full of homes from the 1950s, 1960s, and 1970s. These have solid bones and generous lots, but they also carry the finishes, layouts, and building practices of their era, which is exactly what makes them such rewarding renovation candidates. Original kitchens and bathrooms in these homes are often long overdue for the kind of update that respects the house while bringing it fully up to date.
Out in the newer areas, Summerwood, Emerald Hills, Lakeland Ridge, and Clarkdale Meadows, the homes are modern two storeys, and the work skews toward finishing basements, adding built ins, and personalizing spaces that were built to a builder grade standard. Whichever side of The Park your home sits on, we start with the specific house rather than a template, because a 1960s bungalow and a 2015 two storey call for genuinely different approaches.
Our sequence in a bathroom is deliberate and it does not change to save time. We strip to the studs and subfloor so we can see and correct anything hidden. We build up proper waterproofing and, in a shower, the correct slope to the drain, using a membrane system rather than relying on water resistant board to do a job it was never designed to do. Only once that envelope is sound does a single tile go on.
From there it becomes finish work, and finish work is where craft shows. Tile set clean and level with consistent grout lines and cuts that land where they should. A vanity scribed to a wall that is not straight. Glass, lighting, and hardware that pull the room together. A small bathroom leaves nowhere to hide a sloppy line, which is exactly why the precision matters so much in the one room where every surface is at arm's length.
Layout, fixtures, tile, and vanity chosen against a fixed scope so there are no surprises, and so you can picture the finished room before demolition begins.
We strip to the studs and subfloor, correct anything hidden, then build up proper waterproofing and slope. This is the stage that decides how long your bathroom lasts, so it is the stage we never rush.
Tile is set clean and level on a sound substrate, followed by the tub or shower, vanity, toilet, and fixtures, each installed by the right trade.
Lighting, mirrors, glass, hardware, paint, and the small adjustments that make the room feel considered, all walked with you at the end.
Custom tiled showers, freestanding and drop in tubs, and glass, all built on proper waterproofing and correct slope so water goes where it should.
Membrane, backer, and tile installed in the right order, with sealed penetrations, so water stays out of the wall and floor for good.
In floor electric heat under tile, a modest upgrade that transforms an Edmonton bathroom through a long winter and is far easier to add during a renovation than after.
Custom and stock vanities, medicine and linen storage, and cabinetry scribed to fit rooms that are rarely perfectly square.
Licensed rough in and finish plumbing for tubs, showers, sinks, and toilets, coordinated with the tile and cabinetry.
Proper vanity and ambient lighting, exhaust sized for the room, and GFCI protected circuits, all to code.
Every home in Sherwood Park has its own history. We plan the work around the specific house in front of us, then build it to last.
The single most important thing we can tell you about a bathroom is that waterproofing is not optional and it is not where you save money. We build the hidden layers to standard every single time, because that is precisely the part that fails when someone rushes it, and it fails expensively, taking the framing and finishes with it. A properly waterproofed bathroom is one you never have to think about again.
Above the waterproofing, tile is where the craft becomes visible. Straight lines, tight and even grout, cuts that land cleanly at edges and corners, and layouts planned so you are not left with a sliver of tile in the most visible spot. In a room this small, every surface is seen up close and every imperfection is obvious, which is exactly why precise tile work is worth insisting on.
Bathroom costs are driven by size, the complexity of the tile and shower, whether plumbing moves, and the fixtures you choose. A powder room with a sink and toilet is a modest project. A full ensuite with a custom tiled shower, a freestanding tub, heated floors, and relocated plumbing sits at the other end of the scale entirely.
Custom tiled showers and intricate tile patterns take skilled labour and time, which is where a lot of a bathroom budget goes, and it is money well spent because it is the part most likely to fail if done cheaply. Custom glass and certain tile carry lead times that we plan for so the finish stage is not held up.
You get a fixed written price against a defined scope after design, so you can weigh a heated floor or an upgraded shower against real numbers rather than discovering the cost after you are committed.
We build the hidden layers to standard every time, because that is the part that fails when someone rushes it, and it fails expensively.
Straight lines, tight grout, and cuts that land where they should. In a small room every surface is at arm's length and craft is impossible to hide.
Plumbing, electrical, tile, and finish carpentry all managed by one team against one scope, in the right order.
We treat the substrate, slope, and membrane as the real project, so the beautiful part on top has something sound to sit on.
Tell us about your bathroom renovation project and we will show you what doing it properly in Sherwood Park looks like.