Bespoke Contracting develops basements in Sherwood Park into real living space: family rooms, suites, gyms, and legal secondary suites, built dry, warm, and to code. Sherwood Park is a large hamlet in Strathcona County, first laid out in 1953 as a satellite community for workers at Edmonton's Refinery Row.
Sherwood Park is a large hamlet in Strathcona County, first laid out in 1953 as a satellite community for workers at Edmonton's Refinery Row.
Sherwood Park spans everything from 1950s and 1960s bungalows in the mature core to large modern two storeys in Emerald Hills, so renovation needs vary widely across The Park.
Because we build from the concrete out, the finished basement stays dry and healthy for the life of the home, which matters as much in Sherwood Park as anywhere in the region.
Every home has its own history. Here is what shapes renovation work in Sherwood Park specifically.
Sherwood Park began in the mid 1950s as a planned community and was originally going to be called Campbelltown before the name changed in 1956.
Its oldest neighbourhoods, including Sherwood Heights, Glen Allan, Mills Haven, and Broadmoor, date to the 1950s and 1960s, which means a lot of aging original finishes ready for renovation.
Newer areas such as Summerwood, Emerald Hills, Lakeland Ridge, and Clarkdale Meadows carry a very different housing stock and set of renovation needs.
Sherwood Park is unusual in that it is not a city at all but a very large hamlet within Strathcona County, one of the biggest of its kind in Canada. It grew out of a mid 1950s plan to house workers at Edmonton's Refinery Row, and that origin still shapes it: a community built deliberately and quickly, in identifiable waves, rather than one that grew up slowly over centuries.
That wave pattern matters enormously for renovation. The mature core, neighbourhoods like Sherwood Heights, Glen Allan, Mills Haven, and Broadmoor, holds homes from the 1950s through the 1970s that are now well into the stage where original kitchens, bathrooms, and basements are dated and worn. These are the homes where a thoughtful renovation delivers the most, because good bones are hiding under decades old finishes.
The newer side of The Park, Summerwood, Emerald Hills, Lakeland Ridge, and Clarkdale Meadows, is a different story. Here the homes are recent, often with unfinished basements waiting to become real living space, and renovations tend toward finishing, personalizing, and adding function rather than replacing worn out systems. Understanding which Sherwood Park you are renovating in is the starting point for any sensible plan.
Sherwood Park is a basement development market more than almost anywhere else in the region. The waves of family housing built from the 1970s onward left thousands of homes in Glen Allan, Mills Haven, Broadmoor, and the newer Summerwood and Emerald Hills with unfinished or dated basements sitting on good bones. That is exactly the raw material a proper development turns into real living space.
The catch is that a hamlet built in waves has a wide range of foundation ages and moisture conditions under it. A 1970s basement and a 2010s basement are different projects, and we assess each on its own before recommending anything. Getting the moisture layers right matters as much in Sherwood Park as anywhere, because the homes here are family homes that will put the new space to hard daily use.
Whatever the age of your Sherwood Park home, our approach is the same: understand the specific house in front of us, plan the work against a fixed written scope, and build it properly. You can read more about how we approach Basement Development in Edmonton, and reach out whenever you are ready to talk about your project.
Renovating in Sherwood Park usually means working with one of two very different kinds of home. In the mature core, neighbourhoods like Sherwood Heights, Glen Allan, Mills Haven, and Broadmoor are full of homes from the 1950s, 1960s, and 1970s. These have solid bones and generous lots, but they also carry the finishes, layouts, and building practices of their era, which is exactly what makes them such rewarding renovation candidates. Original kitchens and bathrooms in these homes are often long overdue for the kind of update that respects the house while bringing it fully up to date.
Out in the newer areas, Summerwood, Emerald Hills, Lakeland Ridge, and Clarkdale Meadows, the homes are modern two storeys, and the work skews toward finishing basements, adding built ins, and personalizing spaces that were built to a builder grade standard. Whichever side of The Park your home sits on, we start with the specific house rather than a template, because a 1960s bungalow and a 2015 two storey call for genuinely different approaches.
A properly developed basement is a system, and every layer has a job. A sub floor lifts your flooring off cold, potentially damp concrete and creates a thermal and moisture break. Insulation keeps the wall surfaces warm enough that indoor air does not condense on them. A vapour strategy suited to a below grade wall manages moisture movement rather than trapping it. Together these are what keep the space dry, and skipping any one of them undermines the rest.
Then there are the mechanical realities that a good basement respects and a cheap one ignores: an accessible floor drain, a working sump where the situation calls for it, and correct grading and downspouts outside so water is directed away from the foundation before it ever becomes an indoor problem. We would rather spend time and budget here, where it is invisible, than on an extra finish that sits on top of a space that was never made dry.
We check moisture, ceiling height, existing mechanical, and egress, then design a layout that fits the real space, meets code, and matches your budget. This is where we tell you honestly what your basement can and cannot become.
Proper sub floor, insulation, and vapour control go in first, framed to leave access to mechanical and to meet code. Any moisture or drainage issue is resolved here, before anything gets closed up.
Electrical, plumbing, heating, and egress windows are roughed in and inspected. Getting light, power, comfort, and safe exits right at this stage is what makes a basement feel like real living space rather than a finished cellar.
Drywall, flooring, trim, and the kitchen or bathroom if the plan includes a suite, finished to match the standard of the rest of your home rather than treated as an afterthought.
Warm, quiet living space with lighting and layout designed for how a basement is actually used, from movie nights to a play area.
Self contained suites built to City of Edmonton secondary suite requirements, including egress, fire and sound separation, and a separate entrance where the lot allows.
Adding a full or half bath below grade, with the plumbing, venting, and waterproofing handled properly for a below grade space.
Purpose built rooms with the right flooring, power, and sound control for working from home or training without disturbing the house.
Custom cabinetry and plumbing for entertaining space or a full suite kitchen, built to the same standard as our main floor kitchens.
Code compliant egress windows and proper smoke and carbon monoxide protection built in from the start, not added as an afterthought.
Every home in Sherwood Park has its own history. We plan the work around the specific house in front of us, then build it to last.
The whole game in a basement is moisture, and we build to win it. Sub floor, insulation, and vapour control come first and are done properly, because they are what stand between warm indoor air and a cold foundation. Get that layered correctly and condensation never gets the chance to collect inside your walls. Get it wrong and no amount of nice flooring will save the space.
Just as important is what we do before we frame. If a basement shows any sign of a moisture or drainage problem, we deal with it first rather than building over it and hoping. That honesty up front is the difference between a basement that stays healthy for decades and one that has to be torn out and redone. The best basement work is the work you never have to think about again.
Basement costs depend on size, whether you are adding a bathroom or a full suite, the amount of mechanical work involved, and the finish level. A straightforward open family room finish is far less than a legal secondary suite that needs a kitchen, a bathroom, egress windows, and separate systems.
Bathrooms and kitchens are the biggest cost drivers because they bring plumbing, and below grade plumbing can mean breaking concrete. Egress windows for bedrooms or a suite add cost but are non negotiable for safety and code. The condition of the existing basement matters too, since resolving a moisture issue is money spent before the finishing even begins, though it is money that protects everything above it.
You get a fixed written price against a defined scope after design, so you can decide between an open rec room and a full suite knowing what each actually costs.
Sub floor, insulation, and vapour control come first and are done right. The finishes are the easy part once the envelope is sound.
Secondary suites and egress carry real requirements. We design to them and pull the permits, so your basement is legal, safe, and inspected.
If a basement has a moisture or drainage issue, we resolve it before we frame, never after your new drywall is already up.
A developed basement should feel like part of the house, not a lesser afterthought. We finish it to the same standard as the floors above.
Tell us about your basement development project and we will show you what doing it properly in Sherwood Park looks like.