A bathroom is the hardest working room in the house and the least forgiving of shortcuts. Bespoke Contracting builds Edmonton bathrooms that are waterproofed properly, tiled cleanly, and finished to last, from compact powder rooms to full ensuite retreats.
A bathroom renovation in Edmonton lives or dies on what you cannot see: the waterproofing behind the tile and under the floor. Get that right and everything else is finish work that shows beautifully. Get it wrong and no amount of expensive tile will save you from tearing it out in five years when the wall behind the shower has quietly rotted.
More than any other room in a home, bathrooms punish poor workmanship, and they do it out of sight. A shower that was not waterproofed correctly does not fail dramatically. It weeps water into the wall cavity month after month until the framing is soft and the drywall behind the tile is black. Tile set on the wrong substrate cracks along the grout lines and lets water through to start the same slow process underneath.
This is why we treat the hidden layers, the waterproofing membrane, the slope of the shower floor, the backer board, the sealed penetrations, as the real project. The tile you pick is the part you see and enjoy, but the part that decides whether your renovation lasts ten years or two is buried behind it. A bathroom done right is invisible where it counts.
Older Edmonton bathrooms frequently reveal the cost of previous shortcuts. When we strip an old bathroom back and find rot or mould from a shower that leaked for years, we show you, deal with it properly, and then build the new bathroom the way it should have been built the first time.
Our sequence in a bathroom is deliberate and it does not change to save time. We strip to the studs and subfloor so we can see and correct anything hidden. We build up proper waterproofing and, in a shower, the correct slope to the drain, using a membrane system rather than relying on water resistant board to do a job it was never designed to do. Only once that envelope is sound does a single tile go on.
From there it becomes finish work, and finish work is where craft shows. Tile set clean and level with consistent grout lines and cuts that land where they should. A vanity scribed to a wall that is not straight. Glass, lighting, and hardware that pull the room together. A small bathroom leaves nowhere to hide a sloppy line, which is exactly why the precision matters so much in the one room where every surface is at arm's length.
Layout, fixtures, tile, and vanity chosen against a fixed scope so there are no surprises, and so you can picture the finished room before demolition begins.
We strip to the studs and subfloor, correct anything hidden, then build up proper waterproofing and slope. This is the stage that decides how long your bathroom lasts, so it is the stage we never rush.
Tile is set clean and level on a sound substrate, followed by the tub or shower, vanity, toilet, and fixtures, each installed by the right trade.
Lighting, mirrors, glass, hardware, paint, and the small adjustments that make the room feel considered, all walked with you at the end.
Custom tiled showers, freestanding and drop in tubs, and glass, all built on proper waterproofing and correct slope so water goes where it should.
Membrane, backer, and tile installed in the right order, with sealed penetrations, so water stays out of the wall and floor for good.
In floor electric heat under tile, a modest upgrade that transforms an Edmonton bathroom through a long winter and is far easier to add during a renovation than after.
Custom and stock vanities, medicine and linen storage, and cabinetry scribed to fit rooms that are rarely perfectly square.
Licensed rough in and finish plumbing for tubs, showers, sinks, and toilets, coordinated with the tile and cabinetry.
Proper vanity and ambient lighting, exhaust sized for the room, and GFCI protected circuits, all to code.
Beautiful finishes are only half the job. What sits behind them, done properly, is why our work is still sound in ten years.
The single most important thing we can tell you about a bathroom is that waterproofing is not optional and it is not where you save money. We build the hidden layers to standard every single time, because that is precisely the part that fails when someone rushes it, and it fails expensively, taking the framing and finishes with it. A properly waterproofed bathroom is one you never have to think about again.
Above the waterproofing, tile is where the craft becomes visible. Straight lines, tight and even grout, cuts that land cleanly at edges and corners, and layouts planned so you are not left with a sliver of tile in the most visible spot. In a room this small, every surface is seen up close and every imperfection is obvious, which is exactly why precise tile work is worth insisting on.
Bathroom costs are driven by size, the complexity of the tile and shower, whether plumbing moves, and the fixtures you choose. A powder room with a sink and toilet is a modest project. A full ensuite with a custom tiled shower, a freestanding tub, heated floors, and relocated plumbing sits at the other end of the scale entirely.
Custom tiled showers and intricate tile patterns take skilled labour and time, which is where a lot of a bathroom budget goes, and it is money well spent because it is the part most likely to fail if done cheaply. Custom glass and certain tile carry lead times that we plan for so the finish stage is not held up.
You get a fixed written price against a defined scope after design, so you can weigh a heated floor or an upgraded shower against real numbers rather than discovering the cost after you are committed.
The difference between a bathroom that lasts twenty years and one that fails in three is almost entirely invisible once the tile is on. It is the waterproofing behind it. A bathroom is the wettest room in the house, and water is relentless about finding any gap in the system. We build the wet areas to a proper waterproofing standard: the right membrane, correctly lapped and sealed, sloped where it needs to drain, tested before a single tile goes up.
This is exactly the kind of hidden work that a cheap renovation skips because no one can see it, and it is exactly the kind of failure we get called to fix later. When water gets behind a poorly built shower, it does not stay in the shower. It travels into framing, subfloor, and the ceiling below, and what started as a bathroom problem becomes a structural one. Doing the waterproofing right the first time is the least glamorous and most important thing we do in a bathroom.
Small bathrooms punish bad layout decisions. A few inches in the wrong place makes a door swing awkward, a vanity crowd a toilet, or a shower feel like a phone booth. We plan the layout around how the room is actually used, and we are candid about what is possible within your existing plumbing and what would require moving it. Sometimes the best value is a smarter layout within the same footprint rather than an expensive reconfiguration.
We also build with the future in mind where it makes sense. Blocking in the walls for future grab bars, curbless shower entries, comfort height fixtures, and slip resistant flooring are small decisions during a renovation that pay off enormously if mobility ever becomes a concern. Whether the bathroom is a busy family space or a spa like retreat, the goal is the same: a room that is beautiful, genuinely functional, and built to stay that way.
We build the hidden layers to standard every time, because that is the part that fails when someone rushes it, and it fails expensively.
Straight lines, tight grout, and cuts that land where they should. In a small room every surface is at arm's length and craft is impossible to hide.
Plumbing, electrical, tile, and finish carpentry all managed by one team against one scope, in the right order.
We treat the substrate, slope, and membrane as the real project, so the beautiful part on top has something sound to sit on.
Tell us about your project and we will walk you through what it takes to do it properly.